Skip to content

Ramset

Filters

  • Ramset 00747 Drive Pin, 0.145 in Dia Shank, 3/4 in L, Steel, Zinc

    Ramset
    -
    -

    Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc, 3/4 in L, Suitable for: Remington, Bostitch, Hilti, Redhead, Ramset...

    View full details
    -
    -

  • Ramset 00759 Drive Pin, 0.145 in Dia Shank, Powder Plated

    Ramset
    -
    -

    Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Powder Plated, Suitable for: Powder Actuated Tools

    -
    -

  • Ramset 00780 Drive Pin, 0.145 in Dia Shank, Plated

    Ramset
    -
    -

    Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Plated

    -
    -

  • Ramset 00794 Drive Pin, 0.145 in Dia Shank, 3 in L, Plated

    Ramset
    -
    -

    Ramset Drive Pin, 0.3 in Diameter Head, 0.145 in Shank Diameter, Plated, 3 in Length

    -
    -

  • Ramset 00806 Drive Pin, Steel

    Ramset
    -
    -

    Ramset Drive Pin, Head Diameter: 0.3 in, Steel

    -
    -

  • Ramset 00810 Washered Pin, 0.145 in Dia Shank

    Ramset
    -
    -

    With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all R...

    View full details
    -
    -

  • Ramset 06171/1503K Plated Pin, 0.145 in Dia Shank, Steel, Zinc

    Ramset
    -
    -

    Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of lo...

    View full details
    -
    -

  • Ramset 07886 Drive Pin, 3 in L

    Ramset
    -
    -

    Ramset Drive Pin, 0.3 in Diameter Head, 3 in Length

    -
    -

  • Ramset 10HSMP034

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Clip Pin ; Shank Length (Inch): 3/4 ; Shank Diameter (Decimal Inch): 0.1250 ; Head Diameter (Decim...

    View full details
    -
    -

  • Ramset 11247 Drill Bit, 5/32 in Dia, 4-1/2 in OAL, 5/32 in Dia Shank, Straight Shank

    Ramset
    -
    -

    Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it ...

    View full details
    -
    -

  • Ramset 11248 Drill Bit, 3/16 in Dia, 4-1/2 in OAL, 3/16 in Dia Shank, Straight Shank

    Ramset
    -
    -

    Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it ...

    View full details
    -
    -

  • Ramset 11249 Drill Bit, 5/32 in Dia, 4-1/2 in OAL, 5/32 in Dia Shank, Straight Shank

    Ramset
    -
    -

    Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it ...

    View full details
    -
    -

  • Ramset 11250 Drill Bit, 3/16 in Dia, 4-1/2 in OAL, 3/16 in Dia Shank, Straight Shank

    Ramset
    -
    -

    Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it ...

    View full details
    -
    -

  • Ramset 11256 Drill Bit, 5/32 in Dia, 3-1/2 in OAL, 5/32 in Dia Shank, Straight Shank

    Ramset
    -
    -

    Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it ...

    View full details
    -
    -

  • Ramset 11257 Drill Bit, 3/16 in Dia, 3-1/2 in OAL, 3/16 in Dia Shank, Straight Shank

    Ramset
    -
    -

    Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it ...

    View full details
    -
    -

  • Ramset 11362 Drill Bit, 3/16 in Dia, 5-1/2 in OAL, 3/16 in Dia Shank, Straight Shank

    Ramset
    -
    -

    Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it ...

    View full details
    -
    -

  • Ramset 1202CF

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Angle Clip ; Material: Steel ; Finish/Coating: Standard Finish; Zinc-Plated ; Material Grade: Carb...

    View full details
    -
    -

  • Ramset 12HSMP034

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Clip Pin ; Shank Length (Inch): 3/4 ; Shank Diameter (Decimal Inch): 0.1250 ; Head Diameter (Decim...

    View full details
    -
    -

  • Ramset 14TRHMP034

    Ramset
    -
    -

    Conduit Hangers, Holders & Fasteners; Type: Conduit Hanger w/Bolt ; Conduit Type: EMT ; EMT: 3/4 (Inch); Material: Steel; Steel ; Minimum Flang...

    View full details
    -
    -

  • Ramset 14TRHSS10

    Ramset
    -
    -

    Conduit Hangers, Holders & Fasteners; Type: Conduit Hanger w/Bolt ; Conduit Type: EMT ; EMT: 1 (Inch); Material: Steel; Steel ; Minimum Flange ...

    View full details
    -
    -

  • Ramset 1503K

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin ; Shank Length (Inch): 1/2 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Diameter (Deci...

    View full details
    -
    -

  • Ramset 1506B

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin ; Shank Length (Inch): 3/4 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Diameter (Deci...

    View full details
    -
    -

  • Ramset 1506SD

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 3/4 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Diame...

    View full details
    -
    -

  • Ramset 1508SD

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 1 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Diamete...

    View full details
    -
    -

  • Ramset 1508SD Washered Pin, 0.145 in Dia Shank, Metal, Zinc

    Ramset
    -
    -

    With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all R...

    View full details
    -
    -

  • Ramset 1510SD

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 1-1/4 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Dia...

    View full details
    -
    -

  • Ramset 1510SD Washered Pin, 0.145 in Dia Shank, Steel, Zinc

    Ramset
    -
    -

    With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all R...

    View full details
    -
    -

  • Ramset 1512 Drive Pin, 0.145 in Dia Shank, Steel, Zinc, 100/PK

    Ramset
    -
    -

    Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of lo...

    View full details
    -
    -

  • Ramset 1512SD

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 1-1/2 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Dia...

    View full details
    -
    -

  • Ramset 1512SDA Washered Pin, 0.145 in Dia Shank

    Ramset
    -
    -

    With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all R...

    View full details
    -
    -

  • Ramset 1514SD

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 2 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Diamete...

    View full details
    -
    -

  • Ramset 1516 Drive Pin, 0.145 in Dia Shank, 2-1/2 in L , Steel, Zinc

    Ramset
    -
    -

    Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of lo...

    View full details
    -
    -

  • Ramset 1516A Drive Pin, 0.145 in Dia Shank

    Ramset
    -
    -

    Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of lo...

    View full details
    -
    -

  • Ramset 1516E

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin ; Shank Length (Inch): 2-1/2 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Diameter (De...

    View full details
    -
    -

  • Ramset 1516E Ramguard Pin, 0.145 in Dia Shank, Steel, Zinc

    Ramset
    -
    -

    Coated to improve corrosion resistance in treated lumber and other applications. Fits most powder actuated tools that use 22 cal. Features single s...

    View full details
    -
    -

  • Ramset 1516SDC

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 2-1/2 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Dia...

    View full details
    -
    -

  • Ramset 1516SDC Washered Pin, 0.145 in Dia Shank, 2-1/2 in L, Metal, Zinc

    Ramset
    -
    -

    With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all R...

    View full details
    -
    -

  • Ramset 1516SDE

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 2-1/2 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Dia...

    View full details
    -
    -

  • Ramset 1524SDE

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 3 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Diamete...

    View full details
    -
    -

  • Ramset 1524SDP

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Drive Pin w/Washer ; Shank Length (Inch): 3 ; Shank Diameter (Decimal Inch): 0.1450 ; Head Diamete...

    View full details
    -
    -

  • Ramset 16942 Semi-Automatic Hammer Tool, 10 Pins Drilling

    Ramset
    -
    -

    The Ramset Cobra+ 0.27 Caliber semi-automatic powder-actuated tool can tackle professional remodeling projects, such as attaching wood to concrete ...

    View full details
    -
    -

  • Ramset 34CCMP034L

    Ramset
    -
    -

    Conduit Hangers, Holders & Fasteners; Type: Conduit Clamp ; Conduit Type: EMT ; EMT: 3/4 (Inch); Material: Steel; Steel ; Minimum Flange Thickn...

    View full details
    -
    -

  • Ramset 34CLIP

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Clip Pin ; Shank Length (Inch): 3/4 ; Shank Diameter (Decimal Inch): 0.1040 ; Head Diameter (Decim...

    View full details
    -
    -

  • Ramset 34HSMP034

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Clip Pin ; Shank Length (Inch): 3/4 ; Shank Diameter (Decimal Inch): 0.1250 ; Head Diameter (Decim...

    View full details
    -
    -

  • Ramset 34HSSS10

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Clip Pin ; Shank Length (Inch): 1 ; Shank Diameter (Decimal Inch): 0.1250 ; Head Diameter (Decimal...

    View full details
    -
    -

  • Ramset 38HSMP034

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Clip Pin ; Shank Length (Inch): 3/4 ; Shank Diameter (Decimal Inch): 0.1250 ; Head Diameter (Decim...

    View full details
    -
    -

  • Ramset 38HSSS10

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Clip Pin ; Shank Length (Inch): 1 ; Shank Diameter (Decimal Inch): 0.1500 ; Head Diameter (Decimal...

    View full details
    -
    -

  • Ramset 38TRHMP034

    Ramset
    -
    -

    Powder Actuated Pins & Threaded Studs; Type: Clip Pin ; Shank Length (Inch): 3/4 ; Shank Diameter (Decimal Inch): 0.1250 ; Head Diameter (Decim...

    View full details
    -
    -