DREMEL

Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.

Dremel Cutter, 5/16 in Dia, Shank Diameter: 1/8 in, Point Type: Ball, 35,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in ...

High-speed versatile, carving and engraving cutter. Made of high-quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowi...

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in ...

A versatile, high-quality cutter made of high-grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tap...

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in ...

Convert your corded rotary tool into a light-duty, bench-mounted precision wood shaper with the Dremel® 231 shaper/router table. Featuring a smooth...

Get an engraving kit that does it all. This unique kit lets you engrave or decorate a wide variety of materials, including metal, plastic, glass, c...

To be used with all cutting wheels, sanding discs and polishing wheels.

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is availab...

Dremel® sanding discs have a finer grit than Dremel® sanding bands and because they mount on a Dremel® 402 mandrel, they provide a flexible surface...

The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous m...

The 426 cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-Off wheels ma...

Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces a...

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is availab...

Improve the grip for bits in our rotary tool line with a genuine Dremel® collet set. With the 480, 481, 482, 483 collets, plus a quick-change colle...

The Dremel® chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal ...

Dremel Abrasive Buff, Aluminum Oxide/Silicone Carbide, 1 in Dia, Suitable for: Dremel Rotary Tools, Includes: (1) Coarse 180 Grit and (1) Medium 28...

The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.

A polishing wheel for your rotary tool that has the polishing compound inside. The 520-02 polishing wheel is impregnated with a silicon carbide abr...

This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood...

This wheel for cutting and shaping on soft and hardwoods, fiberglass, plastics and laminates (not metal). This versatile wheel is coated with tungs...

Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting ...

Our powerful tile cutting tool is ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. And if you're feeling ...

Get the grout out and make re-grouting a breeze. With our grout removal attachment, you can turn your favorite Dremel® rotary tool into a powerful,...

Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 right angle attachme...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel® 335-01 plunge router attachment, Dremel® 231 shaper/router t...

Dremel Rotary Tool Bit, 11/64 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Hard...

Dremel Rotary Tool Bit, 16/64 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Hard...

Dremel Rotary Tool Bit, 3/16 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Harde...

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones ...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.

Turn your Dremel® rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasi...

Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.

Dremel® silicon carbide grinding stone. Designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.