Skip to content

dremel

Filters

  • Dremel 426

    Dremel
    -
    -

    Cut-Off Wheel: 1-1/4" Dia, 1/16" Hole

    -
    -
  • Save 56% Save %

    Dremel 426 Cut Off Wheels

    Dremel
    -
    -

    Cutoff Wheel: 1-1/4" Dia, 0.045" Thick, 1/16" Hole Reinforced, 35,000 Max RPM, Use with Angle Grinders

    -
    -
    Save 56% Save %

  • Dremel 426 Cut-Off Wheel, 1-1/4 in Dia, 0.045 in Thick

    Dremel
    -
    -

    The 426 cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-Off wheels ma...

    View full details
    -
    -

  • Dremel 428-02

    Dremel
    -
    -

    Wheel Brush: 3/4" Wheel Dia, Straight

    -
    -

  • Dremel 428-02 Brush, 3/4 in Dia, 1/8 in Arbor/Shank, Carbon Steel Bristle

    Dremel
    -
    -

    Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components. Can ...

    View full details
    -
    -
  • Save 43% Save %

    Dremel 428-02 Carbon Steel Wheel Brushes

    Dremel
    -
    -

    Wheel Brush: 3/4" Wheel Dia, Straight Steel, 15,000 RPM

    -
    -
    Save 43% Save %

  • Dremel 429

    Dremel
    -
    -

    1" Diam Unmounted Buffing Wheel

    -
    -
  • Save 41% Save %

    Dremel 429 Belts & Rolls

    Dremel
    -
    -

    Unmounted Polishing Wheel Buffing Wheel: 1" Dia Felt

    -
    -
    Save 41% Save %

  • Dremel 429 Polishing Wheel, 1 in Dia

    Dremel
    -
    -

    The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous met...

    View full details
    -
    -

  • Dremel 430

    Dremel
    -
    -

    1/2" Wide x 1/4" Diam, Spiral Band Drum

    -
    -
  • Save 50% Save %

    Dremel 430 Accessories

    Dremel
    -
    -

    1/2" Wide x 1/4" Diam, Spiral Band Drum 1/8" Shank Diam, 15,000 RPM

    -
    -
    Save 50% Save %

  • Dremel 430 Sanding Drum, 60 Grit, Aluminum Oxide Abrasive

    Dremel
    -
    -

    Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces a...

    View full details
    -
    -

  • Dremel 4300-5/40 Rotary Tool Kit, 1.8 A, 1/32 to 1/8 in Chuck, Keyless Chuck, 5000 to 35,000 rpm Speed

    Dremel
    -
    -

    The Dremel® 4300 is the first Dremel® rotary tool to allow tool-less and collet-less accessory changes with the inclusion of the three-jaw chuck. T...

    View full details
    -
    -

  • Dremel 431

    Dremel
    -
    -

    60 Grit Aluminum Oxide Coated Spiral Band

    -
    -
  • Save 50% Save %

    Dremel 431 Accessories

    Dremel
    -
    -

    Spiral Band: Aluminum Oxide, 60 Grit, Medium Grade 1/4" Diam, Medium Grade

    -
    -
    Save 50% Save %

  • Dremel 431 Sanding Band, 1/4 in Dia Drum, 1/8 in Dia Shank, 60 Grit, Coarse, Aluminum Oxide Abrasive

    Dremel
    -
    -

    A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is availab...

    View full details
    -
    -

  • Dremel 432

    Dremel
    -
    -

    120 Grit Aluminum Oxide Coated Spiral Band

    -
    -
  • Save 50% Save %

    Dremel 432 Accessories

    Dremel
    -
    -

    Spiral Band: Aluminum Oxide, 120 Grit, Fine Grade 1/2" Diam, Fine Grade

    -
    -
    Save 50% Save %

  • Dremel 432 Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 120 Grit, Coarse, Aluminum Oxide Abrasive

    Dremel
    -
    -

    A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is availab...

    View full details
    -
    -
  • Save 50% Save %

    Dremel 438 Accessories

    Dremel
    -
    -

    Spiral Band: Aluminum Oxide, 120 Grit, Fine Grade 1/4" Diam, Fine Grade

    -
    -
    Save 50% Save %

  • Dremel 438 Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 120 Grit, Coarse

    Dremel
    -
    -

    A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is availab...

    View full details
    -
    -

  • Dremel 442-02

    Dremel
    -
    -

    Cup Brush: 1/2" Dia, Steel, Crimped

    -
    -

  • Dremel 442-02 Brush, 1/2 in Dia, 1/8 in Arbor/Shank, Carbon Steel Bristle

    Dremel
    -
    -

    Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components. Can ...

    View full details
    -
    -
  • Save 48% Save %

    Dremel 442-02 Carbon Steel Cup Wire Brushes

    Dremel
    -
    -

    Cup Brush: 1/2" Dia, Steel, Crimped 15,000 Max RPM

    -
    -
    Save 48% Save %

  • Dremel 443-02

    Dremel
    -
    -

    End Brushes: 1/8" Dia, Steel, Flat Faced Wire

    -
    -

  • Dremel 443-02 Brush, 1/8 in Dia, 1/8 in Arbor/Shank, Carbon Steel Bristle

    Dremel
    -
    -

    Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components. Can ...

    View full details
    -
    -
  • Save 48% Save %

    Dremel 443-02 Carbon Steel Wheel Brushes

    Dremel
    -
    -

    End Brushes: 1/8" Dia, Steel, Flat Faced Wire 3 mm Shank Dia, 15,000 Max RPM

    -
    -
    Save 48% Save %

  • Dremel 446

    Dremel
    -
    -

    Spiral Band

    -
    -

  • Dremel 4485

    Dremel
    -
    -

    1/32, 1/16, 3/32 and 1/8 Inch Rotary Tool Collet Nut Kit

    -
    -

  • Dremel 4485 Collet Nut Kit, Steel

    Dremel
    -
    -

    Improve the grip for bits in our rotary tool line with a genuine Dremel® collet set. With the 480, 481, 482, 483 collets, plus a quick-change colle...

    View full details
    -
    -
  • Save 50% Save %

    Dremel 4485 Grinders, Hand

    Dremel
    -
    -

    Collet Nut Kit: Use with Rotary Tools Includes One Quick-Change Collet Nut & 4 Collets: 480 (1/8 in, 3.2mm), 481 (3/32 in, 2.4mm), 482 (1/16 in...

    View full details
    -
    -
    Save 50% Save %
  • Save 50% Save %

    Dremel 4486 Accessories

    Dremel
    -
    -

    Flexible Shaft Grinder Chuck

    -
    -
    Save 50% Save %

  • Dremel 4486 Drill Chuck, 1/32 in Chuck, Steel, Dim Gray, Keyless

    Dremel
    -
    -

    The Dremel® chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal ...

    View full details
    -
    -

  • Dremel 453

    Dremel
    -
    -

    Mounted Point: 80 Grit

    -
    -

  • Dremel 453 Grinding Stone, 5/32 in Dia, 1/8 in Arbor/Shank, 120 Grit, Steel Abrasive

    Dremel
    -
    -

    Dremel® accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For us...

    View full details
    -
    -

  • Dremel 454

    Dremel
    -
    -

    Mounted Point: 3/16" Thick, 1/8" Shank Dia, B82, 80 Grit, Coarse

    -
    -