Partition & Panel Systems Hardware

Flat Washers; Washer Type: Standard ; System of Measurement: Inch ; Material: Brass ; Screw Size: 5/8 ; Inside Diameter: 0.54 ; Inside Diameter (In...

Renin Barn Door Hardware Kit, Maximum Door Width: 36 in, Track Length: 78-3/4 in, Maximum Weight per Door: 300 lb, Door Thickness: 1-3/8 in, Steel,...

Renin Bifold Barn Door Hardware Kit, Four-Wheel Pivot, Maximum Door Width: 18 in, Track Length: 78 in, Steel, Black, Matte, Suitable for: 84 in H x...

Easy Clip soft close attachment is designed to install quickly and discreetly onto most flat track barn door hardware kits. This patent pending low...

Renin Bifold Barn Door Hardware Kit, Two-Wheel Pivot, Maximum Door Width: 21 in, Track Length: 48 in, Maximum Weight per Door: 150 lb, Door Thickne...

National Hardware V2555 Mirror Holder, 35 lb Weight, Plastic, Clear, Wall Mounting, Includes: Anchor, Fastener Easy to use design for the homeowner...

Designed for animal enclosures, secures heavy wood gates and doors. Safety lock closes automatically to help prevent accidental opening by livestoc...

National Hardware V2555 Mirror Holder, 35 lb Weight, Plastic, Clear, Wall Mounting, Includes: Anchor, Fastener Easy to use design for the homeowner...

Diameter of 3 in. Bagged.

National Hardware Gate Caster, 125 lb Weight, Wheel Diameter: 4 in, Wheel Width: 0.94 in, Wheel Material: Plastic, Housing Material: Steel, Zinc, I...

Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral an...

Plastic underbody with clear handles. 4 in center, 8 in spout. Bagged with a header. Clear acrylic handles Clear acrylic handles 4 in inlet centers...

For exterior, unlocks or locks by key in exterior knob or by turn button in interior lever. 2-3/8 in setback. Standard or drive-in latch. Comes wit...

Used to protect hard floors from scratches and dents. Light wood grain. Round cups that imitate wood grain appearance while protecting hard floors ...

National Hardware Screw Eye, Trade Size: #2, Steel, Storm Shine, 2-5/8 in OAL, Working Load Limit: 115 lb National Hardware's 2-5/8 in screw eyes a...

Completely clears water lines of all water. Screw plug onto female hose inlet, open all drains and faucets and attach to air pump. Allows for easy ...

National Hardware Interlocking Spring Snap, Working Load Limit: 738 lb, Trade Size: 5/8 x 4-3/4 in, Steel, Storm Shine Storm Shine™ finish for styl...

National Hardware Interlocking Spring Snap, Working Load Limit: 146 lb, Trade Size: 1/4 x 2 in, Steel, Storm Shine Storm Shine™ finish for style an...

National Hardware Eye Bolt, Thread Size: 1/2 in, 8 in OAL, Working Load Limit: 300 lb, Steel, Storm Shine, Includes: Nut National Hardware's 1/2 x ...

National Hardware Eye Bolt, Thread Size: 1/4 in, 2 in OAL, Working Load Limit: 80 lb, Steel, Storm Shine, Includes: Nut National Hardware's 1/4 x 2...

National Hardware Screw Eye, Trade Size: #000, Steel, Storm Shine, 3-7/8 in OAL, Working Load Limit: 190 lb National Hardware's 3-7/8 in screw eyes...

Used to strengthen a 90 deg angle by flat attachment to the side at a 45 deg angle. Clearance for 5/16 in bolt or 2 nails per side. 45 deg hole pat...

National Hardware Eye Bolt, Thread Size: 3/8 in, 5 in OAL, Working Load Limit: 160 lb, Steel, Storm Shine, Includes: Nut National Hardware's 3/8 x ...

National Hardware Screw Eye, Trade Size: #0, Steel, Storm Shine, 2-7/8 in OAL, Working Load Limit: 150 lb National Hardware's 2-7/8 in screw eyes a...

National Hardware Screw Hook, Working Load Limit: 60 lb, Wire Diameter: 1/4 in, Steel, Black, Storm Shine, 4-1/4 in L Storm Shine™ finish for style...

National Hardware Screw Eye, Thread Size: 3/16 in, Steel, Storm Shine, 3 in OAL, Working Load Limit: 34 lb National Hardware's 3/16 x 3 in lag scre...

Used for reinforcing 90 deg angles by applying to the inside or outside of the corner. 3/8 in Dia holes. Wider width provides greater area of stabi...

National Hardware Lag Screw Eye, Trade Size: #6, Thread Size: 5/16 in, Steel, Storm Shine, 6 in OAL, Working Load Limit: 175 lb National Hardware's...

National Hardware V2527 D-Ring Hanger, 35 lb Weight, Steel, Zinc Collar holds the screw in place for easy installation Collar holds the screw in pl...

Used for reinforcing 90 deg angles by applying to the inside or outside of the corner. 3/8 in Dia holes. Wider width provides greater area of stabi...

National Hardware Lag Screw Eye, Trade Size: #6, Thread Size: 7/16 in, Steel, Storm Shine, 5-1/4 in OAL, Working Load Limit: 320 lb National Hardwa...

Used for reinforcing 90 deg angles by applying to the inside or outside of the corner. 3/8 in Dia holes. Wider width provides greater area of stabi...

Used for reinforcing 90 deg angles by applying to the inside or outside of the corner. Slots for 1/2 in carriage bolt. Wider width provides greater...

Used for reinforcing 90 deg angles by applying to the inside or outside of the corner. Slots for 1/2 in carriage bolt. Wider width provides greater...

Used for reinforcing 90 deg angles by applying to the inside or outside of the corner. Slots for 1/2 in carriage bolt. Wider width provides greater...

National Hardware Full Threaded Bolt Hook, Steel, Zinc-Plated, 12 in L, Includes: (2) Washers, (2) Nuts Adjusts to correct gate sag Adjusts to corr...