Partition & Panel Systems Hardware

Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inse...

National Hardware Pushbutton Latch, Lock Type: Dual, Zinc, Suitable for: N223-990 1308K Y11 Key Blank, Includes: Mounting Screws, Spring Loaded Str...

National Hardware V162 Cloth Hook, 35 lb Weight, 1 Hooks, Zinc, Brass, Wall Mounting, 0.14 in Diameter Mounting Hole, Projection: 1-15/32 in, Dimen...

National Hardware Gate Latch, Steel, Black, Post Mounting, 6-3/4 in H, Suitable for: Fence Post Between Gate And Jamb, Includes: Hex Lags Offers an...

Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts d...

Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Can be drilled, cut, heated, sha...

Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts d...

National Hardware Cut Tack, Head Size: #4, Shank Size: 7/16 in, Copper

With bolt, nut and washer. Pack loose. Closes end of rail to prevent birds from nesting Closes end of rail to prevent birds from nesting

National Hardware Cut Tack, Head Size: #10, Shank Size: 5/8 in, Galvanized Steel

600 lb capacity. Pair flexible with door strap. Boxed. Slot in top of door strap allows lateral and vertical adjustment Slot in top of door strap a...

National Hardware Gate Latch, Steel, Zinc, 4.44 in H, Suitable for: Out-Swing Gates, Doors And Animal Pens, Includes: Mounting Screws Strike can be...

National Hardware Self-Adjusting Latch, Steel, Zinc, Post Mounting, Suitable for: Gate, Includes: Mounting Screws MaxLatch self adjusting design Ma...

Fits most engines with side water inlets. Flushes away sand, silt, salt and alkali. Prevents clogging and corrosion, extending the engine life. Ins...

Contains a left and right adjustable two-piece rear drawer socket. Adjusts 1/4- 1-1/2 in. 1 set per card. One left and one right pair One left and ...

National Hardware T-Hinge, Pin Type: Fixed, Wall Mounting, Number of Mounting Holes: 6, Stainless Steel, Stainless Steel, Dimensions: 3-5/32 in H O...

National Hardware Box Rail Bracket, Galvanized Steel, Dimensions: 4-7/8 in L x 1-1/2 in W x 3-15/32 in H, Suitable for: #5114 or #5116 Box Rail, In...

National Hardware Arched Gate Pull, 1-5/8 in W, 1-17/32 in D, 8-1/2 in H, Screw Mounting, Black, Steel, Powder-Coated Decorative arched design with...

US Hardware Drain Plug, Stainless Steel, Suitable for: 1 in Dia Drain

Use for gate latches, safety guards, support braces and ladder hangers. Anodized aluminum is weather-resistant Anodized aluminum is weather-resista...

Used for motor mounts, drawer slides, bicycle racks and bed frames. Excellent forming and welding characteristics Excellent forming and welding cha...

Designed for new installations with Stanley's 130708, 130559, 130583 and 130617 hooks. Strap punched for 5/16 in (6 in and 8 in sizes) or 3/8 in (1...

National Hardware Spring Hinge, 30 lb Weight, Door Leaf Height: 3-1/2 in, Frame Leaf Height: 3-1/2 in, Pin Type: Removable, Wall Mounting, Number o...

Jackson Wire Hardware Cloth, 19 ga, 1/2 in Mesh, Vinyl-Coated, Green, 5 ft Length, 24 in Width

Used on roofs to cover and protect vent pipes. Size of 2-7/8 in x 5-7/16 in OD x 2 in ID.

Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed. Designed for use as a door st...

For wooden legs, taps in and will not split wood. Felt base protects hard surfaces and slides easily over floors that can be marred by most other g...

Used for bed frames, bicycle racks, drawer slide and motor mounts. Can be drilled Can be drilled Corrosion-resistant galvanized finish

Die-cast Zamak® with perma-plate chrome finish. Base is pre-drilled for four #8 fasteners. Extruded from very hard, durable, lightweight magnesium ...

National Hardware Spear Gate Pull, 1-19/32 in D, 7-3/4 in H, Screw Mounting, Black, Steel Decorative spear design and with decorative material Deco...

Eaton Mounting Arm and Hardware Works with cooper lighting's NH series mercury vapor lights, G Series and No E70H high pressure sodium light fixtur...

Brass. For 1 in Dia drains.

National Hardware Cane Bolt, Bolt Length: 24 in, Steel, Zinc Cane bolt anchors one gate while the gate latch acts as a stop for the other gate Cane...

For OMC, Johnson and Evinrude. Features ultrasonically welded acetal. 3/8 in Barb.

Replace ultra-flow bulb. Large alcohol compounded primer bulb for 3/8 in fuel line assemblies. Reduces flow restriction for maximum flow.

National Hardware Hook/Eye Hinge, 100 lb Weight, Door Leaf Height: 1/2 in, Door Leaf Length: 4 in, Screw Mounting, Steel, Zinc

Pumps water level down to 3/8 in. Comes with compact 3/4 ID hose with 3-5/16 in high. For use with 12 VDC systems only. Outputs 600 gph at 0 deg ri...

National Hardware Hook/Eye Hinge, 150 lb Weight, Door Leaf Height: 5/8 in, Door Leaf Length: 5 in, Screw Mounting, Steel, Zinc

National Hardware V163 Cloth Hook, 35 lb Weight, 2 Hooks, Zinc, Oil-Rubbed Bronze, Wall Mounting, 0.14 in Diameter Mounting Hole, Projection: 1 in,...

National Hardware Heavy Strap Hinge, 20 lb Weight, Number of Holes: 8, Pin Type: Tight, Door Leaf Height: 2.43 in, Door Leaf Length: 6 in, Leaf Thi...

For boats up to 39.4 ft length. Die-cast Zamak with perma-plate chrome finish. Light includes one 7.5 W lamp. Base is pre-drilled with two counters...

National Hardware Hook/Strap Hinge, 200 lb Weight, Door Leaf Height: 1.52 in, Door Leaf Length: 14 in, Leaf Thickness: 1/4 in, Pin Diameter: 0.68 i...

Fuel connector, male for OMC engines. Brass construction and 1/4 in NPT thread.

Used for motor mounts, drawer slides, bicycle racks and bed frames. Excellent forming and welding characteristics Excellent forming and welding cha...

Molded one-piece construction of white marine vinyl. Smooth, round shape assures fewer hull abrasions. Grommets are integrally molded into each end...

National Hardware Spring Hinge, 37 lb Weight, Wall Mounting, Number of Mounting Holes: 8, Cold Rolled Steel, Brass, Suitable for: Hinge Cutout and ...

National Hardware Door Stop, Base Diameter: 2.34 in, Projection Size: 1 in, Brass/Rubber, Solid Brass, Wall Mounting Designed to protect wall and d...

National Hardware Self-Adjusting Latch, Steel, Black, Post Mounting, Suitable for: Gate, Includes: Mounting Screws MaxLatch self adjusting design M...