Hardware

To be used with all cutting wheels, sanding discs and polishing wheels.

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is availab...

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is availab...

Turn your Dremel® rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasi...

Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting ...

The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous m...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.

Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.

Turn your Dremel® rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasiv...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.

Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.

Dremel® sanding discs have a finer grit than Dremel® sanding bands and because they mount on a Dremel® 402 mandrel, they provide a flexible surface...

The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.

Dremel® 953 aluminum oxide grinding stone. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welde...

This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood...

Dremel® silicon carbide grinding stone. Designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.

Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces a...

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in ...

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in ...

Dremel Cutter, 5/16 in Dia, Shank Diameter: 1/8 in, Point Type: Ball, 35,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood

Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in ...

A polishing wheel for your rotary tool that has the polishing compound inside. The 520-02 polishing wheel is impregnated with a silicon carbide abr...

Dremel Max Life Abrasive Buff, 1-3/16 in Diameter, Applicable Materials: Aluminum, Glass, Plastic, Steel, Wood, Includes: (1) 180 and (1) 280 Grit ...

A versatile, high-quality cutter made of high-grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tap...

For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).

For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).

High-speed versatile, carving and engraving cutter. Made of high-quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowi...

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel® 335-01 plunge router attachment, Dremel® 231 shaper/router t...

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones ...

Dremel Max Life Rotary Carving Bit, 5/16 in Diameter, 1/8 in Shank Diameter, 15,000 to 30,000 rpm Speed, HSS, TiN-Coated, 1-1/2 in Length, Applicab...

Improve the grip for bits in our rotary tool line with a genuine Dremel® collet set. With the 480, 481, 482, 483 collets, plus a quick-change colle...

Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plasti...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Ste...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Ste...

Dremel Cutter, 3/32 in Dia, Shank Diameter: 1/8 in, Point Type: Cylinder, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Ste...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Ste...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Ste...

Dremel Cutter, 3/32 in Dia, Shank Diameter: 1 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Stee...

The Dremel® chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal ...

Dremel's line of Max Life high-performance accessories provide long-lasting performance and impressive durability. Built to give you longer lasting...

The 426 cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-Off wheels ma...

Our powerful tile cutting tool is ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. And if you're feeling ...

Dremel Rotary Tool Bit, 3/16 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Harde...

Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either it...

Dremel Rotary Tool Bit, 16/64 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Hard...

Dremel Rotary Tool Bit, 11/64 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Hard...

The Dremel® EZ Lock™ carbide cutting wheel makes accessory changes easy as pull twist-release. The one-piece mandrel design simplifies the process ...