Bath

Water Source Cable Guard, Suitable for: 4, 5, 6 in Well Casings

Water Source Check Valve, 1 in Nominal, NPT Connection, Media: Gas, Oil, Water, 1.9 in Length, 1.7 in Width, 3.2 in Height, Brass Body, 200 psi Pre...

Water Source Check Valve, 1-1/4 in Nominal, Brass Body, 200 psi Pressure, 180 deg F, Suitable for: Jet, Submersible and Centrifugal Pumps

Water Source Yard Hydrant Elbow, Nominal Size: 1 in, Barb x MPT Connection, Angle: 90 deg, 120 psi, Operating Temperature: 100 deg F, Brass

The 1 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plast...

The 1 in barbed x 3/4 in male NPT x 1 in barbed brass hydrant tee allows multiple PVC pipe lines to be connected to the hydrant. This piece makes h...

The 3/4 in barbed x 3/4 in male NPT x 3/4 in barbed brass hydrant tee allows multiple flexible poly pipe lines to be connected to the hydrant. This...

The brass insert coupling connects two PVC pipes together. It has 1 in insert x 1 in insert. Use with clamps.

Water Source Pool Pressure Gauge, Gauge Case Material: Steel, 1/4 in Connection, Measuring Range: 100 psi, Lens Material: Glass

The pressure gauge measures water pressure in the pressure tank. It has a 1/4 in lower connection. Dark numbers are easy to read on the gauge.

The 1 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all...

The 1-1/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure...

The 1/2 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure a...

The pitcher pump is made with cast iron for optimum strength. It has a rugged design for a long service life. This pump has a maximum lift of 25 ft.

The pitcher pump leathers are used in pitcher pumps. Prime the pump before each use. When wet, leathers will expand to create an air tight seal.

Water Source Flat Valve, Leather, Dimensions: 3-1/2 x 1-7/8 in

The 20/40 psi pressure switch signals the pump to start when the water system drops to a preset (e.g. 20 psi) and stop at high-pressure mark (e.g. ...

Water Source Pressure Switch, 115/230 V, Dimensions: 3 in L x 4 in W x 4 in H, Steel Body, Gray, 30, 50 psi Working, Suitable for: Submersible Well...

Water Source Pressure Switch, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Working Pressure: 20 to 40 psi

The 30/50 psi low pressure switch signals the pump to start when the water system drops to a preset low pressure (e.g. 30 psi) and stop at high-pre...

The 1/2 in relief valve protects tank systems from pressure build-up. It is recommended for use on all submersible pumps or systems that build more...

Water Source Inline Sump Check Valve, 1-1/2 in Nominal, MNPT Connection, PVC Body

The 13 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gaug...

Water Source Foot Valve, 1-1/4 in Connection, 200 psi Pressure, Brass Body, Includes: #8 Perforated Brass Screen Strainer