Products

Flair-it 1/2" PEX Pipe Cap, made of plastic, is used to connect PEX or polybutylene pipes. It has a FPT connection type and comes in a pack of 1.

Flair-It 1/2" PEX Pipe Plug, is used to plug 1/2" PEX or polybutylene pipe. It is made of PVC and comes in a bulk pack of 1.

Tigre USA 1/2" Plastic Insert Coupling. It is PolyxPoly. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. It...

Tigre USA 1/2" Poly Female Pipe Thread Insert Adapter is a plasticxfemale adapter. It is used to connect poly insert fittings to PE Polyethylene pi...

Tigre USA 1/2" Poly Female Pipe Thread Insert Elbow, InsertxFemale. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel...

Tigre USA 1/2" Poly Female Pipe Thread Insert Tee. It is PlasticxPlasticxFemale. Poly insert fittings are connected to PE Polyethylene pipe with st...

Tigre USA 1/2" Plastic Insert Elbow. It is PolyxPoly. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. It is...

Tigre USA 1/2" Plastic Insert Tee. It is PolyxPolyxPoly. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. It...

Tigre USA 1/2" Poly Male Pipe Thread Insert Adapter, Male Iron PipexInsert. Poly insert fittings are connected to PE Polyethylene pipe with stainle...

1/2" Poly Male Pipe Thread Insert Tee, Plastic x Plastic x Male PVC. Poly insert fittings are connected to PE Polyethylene pipe with stainless stee...

Watts 1/2 in. Lead-Free Water Pressure Reducing Valve. Features National Pipe Thread Female Union x National Pipe Thread Female connectors. Provide...

Homewerks Worldwide 1/2" PVC Compression Repair Pipe Coupling, is used for connecting two pieces of 1/2" PVC pipe. It is made of PVC and has a maxi...

Homewerks Worldwide 1/2" PVC Compression Adapter, 1/2" MPT, is used to connect PVC pipe to a male pipe thread. It is made of PVC and has a maximum ...

Homewerks Worldwide 1/2" PVC Compression Pipe Tee, is used to connect three pipes of the same diameter at a right angle. It has a female threaded b...

Southwire Simpush 1/2" PVC-CIC Push-To-Install Coupling. Push-to-install couplings are used to connect PVC conduit without adhesive quickly, firmly...

Homewerks Worldwide 1/2" Gray PVC Solvent Weld Slip Union, is a heavy duty schedule 80 fitting with rubber o-rings. It can be used with either sche...

ProLine 1/2" PVC Solvent Weld Stop Valve, Schedule 40. It is for use in cold water systems up to 100 PSI at 73 degrees Fahrenheit. It complies with...

Homewerks Worldwide 1/2" Gray PVC Threaded Union. It is heavy duty schedule 80 with rubber o-rings. It can be used with either schedule 80 or Sched...

Watts Aqualock 1/2 In. Copper Tube Size PEX Quick Connect Stackable Tee. It allows quick connect connection without cutting small pieces of pipe. T...

National Hardware's 1/2" Quick Link provides a fast, secure connection between chain and chain accessories. Steel body construction provides maximu...

1/2" Radius Beading Router Bit, 1/4 Shank, TiCo High Density Carbide.

ASC Anvil 1/2" Galvanized Right Hand Malleable Coupling. It is made of malleable iron and has a galvanized finish. It is used to connect two pipes ...

Raindrip 1/2" Sprinkler Riser Adapter, connects Raindrip low volume sprinklers to 1/2" male pipe thread sprinkler riser. It has a 1/2 inch Female P...

#I-100, 1/2" Solid Center Auger Bit, 4-1/2" Twist Length, 7-1/2" Overall Length, Provides Extra Rigidity While Boring, Wide Lands Keep The Bit Stra...

National Hardware's 1/2" x 3" Stainless Steel Bolt Snap with Swivel Eye is designed to use with rope, chain, strap, animal leashes and other home, ...

ProLine Celcon 1/2" Threaded Standard Pattern Hose Bibb with 3/4" Hose Thread Outlet. It is made of plastic and has a gray finish. It has a maximum...

ProLine Celcon 1/2" Threaded Straight Hose Bibb. It has a no-kink pattern and a 3/4" hose thread outlet. It is made of Celcon and can withstand up ...

Raindrip Swivel Tee. It is a drip irrigation swivel tee. It connects drip tubing to threaded sprinkler riser. It is rated for water pressure up to ...

1/2" Diameter, 90 Degree, V-Grooving Router Bit, 1/4 Shank, TiCo High Density Carbide.

1/2", White, 45 Degree, Slip x Slip Ell, Used To Make A 45 Degree Turn In A Run Of Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requ...

1/2" White 90 Degree Street Elbow, Spigot x Slip, Used To Make A Right Angle Turn From Another Fitting, Used In Sprinkler & Irrigation Systems,...

1/2", White, 90 Degree, Slip x Slip Ell, Used To Make A 90 Degree Turn In A Run Of Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requ...

1/2", White, 90 Degree, Female Thread x Female Thread Ell, Used To Make A 90 Degree Turn In A Run Of Pipe, Used In Sprinkler & Irrigation Syste...

1/2" White Male Adapter, Slip x Male Thread, Connects A Pipe To A Female Thread Fitting, Threads Are Inside To Allow Connecting Of Male Pipe Thread...

1/2" White Plug Spigot, Creates A Seal At The End Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.

ProLine 1/2" White Schedule 40 PVC Check Valve is a solvent weld check valve with a stainless steel spring loaded PVC poppet and a neoprene seal. I...

ProLine 1/2" White Schedule 40 PVC Check Valve. It is threaded and has a stainless steel spring loaded PVC poppet with neoprene seal. It is rated a...

1/2" White Side Inlet Ell, Slip x Slip x Female Thread, Allows For A 90 Degree Turn In A Run Of Pipe While Allowing For Simultaneous Branching, Use...

1/2", White, Slip x Slip Coupling, Used To Join 2 Lengths Of Pipe Of The Same Size, Used In Sprinkler & Irrigation Systems, Meets The Requireme...

1/2", White, Slip x Slip x Slip Tee, Joins A Branch Pipe Into A Run Of Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ...

1/2", White, Slip x Slip x Thread Tee, Joins A Branch Pipe Into A Run Of Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements O...

1/2" x 8" FTG Stub Out, U620L, air chamber features a male solder end, fittings control water hammer in new and existing structures in above-ground...

1/2" x Close, 1-1/8" Stainless Steel Pipe Nipple, Type 304 Stainless, 150 LB Rated, Lead Free Product, Male Pipe Thread, Both Ends, Use To Connect ...

1/2" x Short, 1-1/2" Stainless Steel Pipe Nipple, Type 304 Stainless, 150 LB Rated, Lead Free Product, Male Pipe Thread, Both Ends, Use To Connect ...

1/2" x 36" Round Steel Tube, Hot Rolled Steel, Weldable.

1/2" (12mm) Acid-Free Black on Clear. All TZ Machines.

1-1/2 OZ, 1/2", #11, Blued, Double Point Tack.

1/2 OZ, 1/2", #6, Aluminum, Cut Tacks.