Products

ASC Anvil 1/2" Black Pipe Plug is made of malleable iron and has a black finish. It is used to plug the end of a pipe.

STZ 1/2" Black Pipe Plug is a malleable black iron fitting that is used for residential potable water and drainage applications. It has a maximum t...

STZ 1/2" Black 90 Degree Street Elbow. It is made of malleable iron and has a black finish. It has a maximum pressure of 300 psi and a maximum temp...

STZ 1/2" Black 45 Degree Street Elbow is a threaded fitting used to connect two pipes at a 45-degree angle. It is made of iron and has a maximum wo...

ASC Anvil 1/2" Black Street 90-Degree Elbow. It is made of malleable iron and has a maximum pressure of 300 psi.

ASC Anvil 1/2" Black Tee. It is made of malleable iron and has a black finish. It has three FPT (Female Pipe Thread) ends.

STZ 1/2" Black Tee. It is a threaded tee with a maximum working pressure of 300 psi and a maximum working temperature of 350 degrees Fahrenheit. It...

STZ 1/2" Black Union. It is a threaded union with a maximum working pressure of 300 psi and a maximum working temperature of 350 degrees Fahrenheit...

ASC Anvil 1/2" Black Union is made of malleable iron and has a ground joint. It is suitable for use with water, oil, and gas.

Boiler Feed Water Pressure Regulator, 1/2" Female Pipe Thread Inletand Outlet With 1/2" Female Pipe Thread Bottom Connection For Installation Of Ex...

ProLine 1/2" Brass T-Handle Ball Valve. It is ideal for commercial and residential flow control systems using water, oil, gas or steam. It features...

ProLine 1/2" Bronze Float Valve, Male NPS Thread Inlet with Locknut, Plain Outlet, 1/4"-20, high tensile strength serrated arms for float rod adjus...

1/2 C Tube Cap, U617, features a solder cup, fitting is used to fit over the end of pipe to seal the end, lead-free.

Raindrip 1/2 Circle Adjustable Spray Assembly. It is a drip irrigation multi-dripper combination assembly. It has a maximum flow rate of 23.9 GPH a...

Raindrip 1/2" Compression Coupling. It is used to join 2 lengths of drip line tubing. It can be used with water pressure up to 60 psi (pounds per s...

Raindrip 1/2" Compression Elbow. It is a loose, bulk bin item. It has a pressure rating of 60 psi and is available in black or green.

Nibco 1/2" CPVC 45-Degree Elbow. It is made of chlorinated poly vinyl chloride (CPVC) and is corrosion resistant and Lead-Free. It has a maximum wo...

Nibco 1/2" CPVC 90-Degree Elbow. It is suited for hot and cold water pressure distribution systems. This 90-degree slipxslip elbow features female ...

ProLine 1/2" (5/8" Outer Diameter) CPVC Boiler Drain. It is made of chlorinated poly vinyl chloride (CPVC) and has a maximum working temperature of...

Nibco 1/2" CPVC Cap. It is made of FlowGuard Gold CPVC and is ideally suited for hot and cold water pressure distribution systems in residential an...

B&K 1/2" (5/8" Outer Diameter) Compression Repair Coupling. It has a CPVC body and nuts with rubber gaskets. It is rated at 100 PSI at temperat...

Nibco 1/2" CPVC Coupling. It is made of FlowGuard Gold CPVC and is ideally suited for hot and cold water pressure distribution systems in residenti...

Nibco 1/2" CPVC Female Pipe Thread Adapter with Rubber Gasket. The NIBCO CPVC-CTS female adapter is made of FlowGuard Gold CPVC and is ideally suit...

Nibco 1/2" CPVCx1/2" Female Pipe Thread Wing Elbow. It is made of chlorinated poly vinyl chloride (CPVC) and has a maximum working pressure of 400 ...

Nibco 1/2" CPVC Male Pipe Thread Adapter is made of FlowGuard Gold CPVC and is ideally suited for hot and cold water pressure distribution systems ...

ProLine 1/2" CPVC Solvent Weld Stop & Waste Valve with Drain Cap. It has a neoprene seal disc and is for use with hot or cold water up to 100 P...

ProLine 1/2" CPVC Solvent Weld Stop Valve with Neoprene Seal Disc. It is for use with hot or cold water up to 100 PSI at 180 degrees Fahrenheit. It...

Nibco 1/2" CPVC 90-Degree Street Elbow. It is made of FlowGuard Gold CPVC and is ideally suited for hot and cold water pressure distribution system...

Nibco 1/2" Tee. It is made from FlowGuard Gold CPVC and is suited for both hot and cold water pressure distribution systems. This tee is perfect fo...

Nibco 1/2" CPVC Wing Elbow. It is corrosion resistant and Lead-Free. It has a maximum working pressure of 400 psi and a maximum working temperature...

Weber half-size Cutting Board with basin. Drop into the side table of Weber Griddle grills. Keep accessories protected in durable plastic bin under...

1/2" CxC 45 Elbow, U606, elbow features solder cups, fitting provides a means of changing the pipe line direction by 45 degrees, lead-free.

1/2" CxC 90 Drop Elbow, C7075, elbow features solder cups and mounting ears, the fitting provides a means of changing the pipeline direction 90 deg...

1/2" CxC 90 Elbow, U607, features solder cups and a close rough radius, fitting provides a means of changing the pipeline direction 90 degrees, lea...

1/2" CxC 90 Elbow 10/bag, CP607, features solder cups and a close rough radius, fitting provides a means of changing the pipeline direction 90 degr...

1/2" CxC 90 Elbow LngRad, U607LT, features solder cups and a long turn radius, fitting provides a means of changing the pipeline direction 90 degre...

1/2" CxC Coup W/Stop, C600, features solder cups and a dimple stop, fitting provides a means of connecting two lengths of tube together, lead-free.

1/2" CxC Coup/Stp 10/bag, CP600, features solder cups and a dimple stop, fitting provides a means of connecting two lengths of tube together, lead-...

1/2" CxC Coupler No Stop, C601, features solder cups and no stop, fitting provides a means to connect/repair two lengths of tube, lead-free.

1/2" CxC Union, U633W, features solder cups, fittings are used to allow repair to the line without damage, lead-free.

1/2" CXCXC Tee, U611, features solder cups, fitting allows for a connection to be made in continuous pipeline and branch out to a different directi...

1/2" CXCXC Tee 10/bag, UP611, features solder cups, fitting allows for a connection to be made in continuous pipeline and branch out to a different...

1/2" CxCxF Tee, U712, features solder cups on the run and female NPT threads on the branch, allows for a connection to be made in continuous pipeli...

1/2" CxF 90 Drop Elbow, U70735, features a solder cup, female NPT threads, and mounting ears, provides a means of changing the pipeline direction 9...

1/2" elbow, U707, provides a means of changing the pipeline direction by 90 degrees, lead-free.

1/2" 1/2 CxM 90 Elbow, U707-4-LF 1/2 CXM 90 ELB FORGED, features a solder cup and male NPT thread, provides a means of changing the pipeline direct...

1/2 CxM Adapt CXF, U603, female adapter features a solder cup and female NPT thread, fittings provide a means for adapting a solder connection to a...

1/2" CxM Adapter, U604, male adapter features a solder cup and male NPT thread, fittings provide a means for adapting a solder connection to a thre...