Products

1-1/4" x 1", Galvanized, Reducing Elbow, 90 Degree.

STZ 1-1/4" X 1" Galvanized Reducing Elbow. It is a threaded elbow with a 90-degree bend and a maximum working pressure of 300 psi. It is made of ir...

ASC Anvil 1-1/4"x1-1/4"x1" Galvanized Reducing Tee is made of malleable iron and has a galvanized finish. It has three female pipe thread (FPT) ends.

STZ 1-1/4" X 1-1/4" X 1" Galvanized Reducing Tee. It is made of iron and has a maximum working pressure of 300 psi. It is suitable for use with non...

ASC Anvil 1-1/4"x1" Galvanized Hex Bushing. It is made of malleable iron and has a hex shape. It has a MIP connection type on one end and a FIP con...

Tigre USA 1-1/4"x1" Poly Male Pipe Thread Reducing Insert Adapter. It is a male iron pipexinsert. Poly insert fittings are connected to PE Polyethy...

Tigre USA 1-1/4"x1" Reducing Poly Insert Coupling. It is PolyxPoly. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel...

1-1/4" x 1" White Reducer Bushing, Spigot x Slip, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirem...

1-1/4" x 1" White Reducer Bushing, Spigot x Female Thread, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The...

1-1/4" x 1" White Reducer Bushing, Male Thread x Female Thread, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meet...

1-1/4" x 1-1/2" Thermoplastic No-Calk Roof Flashing, 1 Piece Construction, Double Seal Leak Free Fit Around The Vent Stack, Fit All Types Of Pile I...

Tigre USA 1-1/4" Insertx1-1/2" Male Iron Pipe, Reducing Male Adapter. It is a poly insert fitting that is connected to PE Polyethylene pipe with st...

Insta Plumb, 1-1/4" OD x 1-1/2", Schedule 40, Marvel Trap Adapter, Allows For Faster & Easier Install, No Nut Washers Tools Or Glue Needed, Sim...

Lasco 1-1/4"x1-1/2"x1/8" #69 Faucet O-Ring. It is made of nitrile (Buna-N) rubber and is used for faucet repair or other uses. It is compatible wit...

1-1/4" x 1-1/4" x 1" White Reducing Tee, Slip x Slip x Slip, Used To Connect A Smaller Branch To A Run Of Pipe, Used In Sprinkler & Irrigation ...

Tigre USA 1-1/4" Barbx1-1/4" Barbx1/2" Female Iron Pipe Insert Tee. It is used for cold water sprinkler, irrigation, and pump installation. Poly in...

1-1/4" x 1-1/4" x 1/2", White, Slip x Slip x Thread, Reducing Tee, Used To Connect A Smaller Branch To A Run Of Pipe, Used In Sprinkler & Irrig...

Tigre USA 1-1/4" Barbx1-1/4" Barbx3/4" Female Iron Pipe Insert Tee. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel...

1-1/4" x 1-1/4" x 3/4", White, Slip x Slip x Slip, Reducing Tee, Used To Connect A Smaller Branch To A Run Of Pipe, Used In Sprinkler & Irrigat...

1-1/4" x 1-1/4" x 3/4", White, Slip x Slip x Thread, Reducing Tee, Used To Connect A Smaller Branch To A Run Of Pipe, Used In Sprinkler & Irrig...

1-1/4" x 1-1/4" x 36", Perfed Angle, Corrosion Resistant, Galvanized Finish, 12 Gauge Thickness, Perforated, Used For Various Garage Door Applicati...

1-1/4" x 1-1/4" x 42", Gray, Open Cell Foam, For Weather-Stripping Around Window Air Conditioners, A Resilient, Compressible Strip For Sealing Out ...

Abbott Rubber 1-1/4" IDx1-3/4" ODx50' Clear PVC Tubing is reinforced with spiral polyester for use in pressure applications. It is manufactured wit...

Abbott Rubber 1-1/4"xIDx1-5/8" ODx50' Clear PVC Tubing is manufactured with non-toxic FDA compounds. It can be used for flexible lines for low pres...

Lasco 1-1/4"x1-7/16"x3/32" #68 Faucet O-Ring. It is made of nitrile (Buna-N) rubber and is used for faucet repair or other uses. It is compatible w...

ASC Anvil 1-1/4"x1/2" Galvanized Hex Bushing. It is made of malleable iron and has a hex shape. It has a MIP (male iron pipe) connection on one end...

ASC Anvil 1-1/4"x1/2" Black Hex Reducing Bushing is made of malleable iron and has a black finish. It is used to reduce the size of a pipe from 1-1...

1-1/4" Diameter x 1/2" Carbide Height, Mortising Router Bit, 1/4 Shank, TiCo High Density Carbide.

1-1/4" x 1/2" Reducer Bushing, Spigot x Slip, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements...

1-1/4" x 1/2" White Reducer Bushing, Spigot x Female Thread, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets T...

1-1/4" X 1/2" Black Bushing

Cove Bit With Bearing D=1-1/4"X1/2" R=3/8" S=1/4"

Mortising Bit D=1-1/4"X1/2" S=1/4"

Rabbeting Bit With Bearing D=1-1/4"X1/2" H=3/8" S=1/4"

1-1/4" X 1/2" Galvanized Bushing

ASC Anvil 1-1/4"x10" Galvanized Nipple, is made from welded steel and has male iron pipe (MIP) threads on both ends for connecting female threaded ...