Products

1-1/2" C Tube Cap, C617, features a solder cup, fitting is used to fit over the end of pipe to seal the end, lead-free.

Larsen 1-1/2" O.D. Chrome Plated Brass Kitchen Drain J-Bend. It is for connection to 1-1/2" cast elbow. Comes carded.

1-1/2" x 1 1/2", Chrome Plated, P Trap, Less Clean Out, 22 Gauge, Bagged.

1-1/2" x 1-1/2", Chrome Plated, Sink Trap J Bend, Less Clean Out, 22 Gauge, Bagged.

Charlotte Pipe 1-1/2" Schedule 40 DWV Fitting Cleanout with Plug. It is made of PVC and has a spigot end and a female pipe thread (FPT) end. It is ...

Charlotte Pipe 1-1/2" Schedule 40 DWV PVC Cleanout Body, SpigotxFIP, is a fitting that connects a spigot to a female threaded pipe. It is made of P...

Homewerks Worldwide Schedule 80 PVC Compression Adapter, 1-1/2 in. MPT, is used to connect two pipes of different sizes or types. It is made of PVC...

1-1/2" Wrot Copper DWV Sanitary Tee, 90 Degree, Copper x Copper x Copper.

1-1/2" CxC 45 Elbow, C606, elbow features solder cups, fitting provides a means of changing the pipe line direction by 45 degrees, lead-free.

1-1/2" CxC 45 Elbow DWV, U906, elbow features solder cups, fitting provides a means of changing the pipeline direction by 45 degrees, Dezincificati...

1-1/2" CxC 90 Elbow, C607, features solder cups and a close rough radius, fitting provides a means of changing the pipeline direction 90 degrees, l...

1-1/2" CxC Coup No Stop, U601, features solder cups and no stop, fitting provides a means to connect/repair two lengths of tube, lead-free.

1-1/2" CxC Coup W/Stop, C600, features solder cups and a dimple stop, fitting provides a means of connecting two lengths of tube together, lead-free.

1-1/2" CXCXC Tee, U611, features solder cups, fitting allows for a connection to be made in continuous pipeline and branch out to a different direc...

1-1/2" CXF Adapt DWV, female adapter features a solder cup and female NPT thread, fitting provides a means of adapting a solder connection to a thr...

1"-1/2" CxF Adapter, C603, female adapter features a solder cup and female NPT thread, fittings provide a means for adapting a solder connection to...

1-1/2" CXM Adapt DWVCast, C804 1 1/2" CXM DWV ADAPT CAST, male adapter features a solder cup and male NPT thread, the fitting provides a means of a...

1-1/2 CxM Adapter, U604, male adapter features a solder cup and male NPT thread, fittings provide a means for adapting a solder connection to a thr...

1-1/2", No-Rust, Double Pulley, Fixed Eye, Safe Working Load 400 LB, Die-Cast Zinc Body, Copper-Nickel Plated, Solid Brass Sheaves.

1-1/2 In. Diamond Grit Hole Saws. Diablo's High-Performance Diamond Grit Hole Saws Deliver Longer Life And Faster Material Removal When Boring Hole...

Charlotte Pipe 1-1/2" 60-Degree Schedule 40 DWV Elbow, is made of PVC and has a 60-degree angle. It has a hub connection on both ends and a diamete...

Charlotte Pipe 1-1/2" DWV 90-Degree Schedule 40 Sanitary Elbow, made of PVC, is used in drain, waste and vent purposes. They are used in gravity-fe...

Charlotte Pipe 1-1/2" PVC Schedule 40 DWV Coupling, is used to connect two pieces of 1-1/2" PVC pipe. It has a hub on each end for easy connection....

Charlotte Pipe 1-1/2" DWV Schedule 40 Female Pipe Thread Adapter, is made of PVC and has a female pipe thread (FPT) connection on one end and a hub...

Charlotte Pipe 1-1/2" DWV Schedule 40 Male Pipe Thread Adapter, is made of PVC and has a male pipe thread (MPT) connection on one end and a hub con...

Charlotte Pipe 1-1/2" SpigotxMIP Adapter, Schedule 40 DWV, is used to connect two pipes of different sizes or types. It has a spigot end on one sid...

Charlotte Pipe 1-1/2" DWV Schedule 40 Male Pipe Thread Plug, is made of PVC and meets ASTM D 1784, ASTM D 2665, ASM D 3311. NSF STANDARD 14 standar...

Charlotte Pipe 1-1/2" DWV Schedule 40 Sanitary Tee. It is made of PVC and has a hub inlet and outlet. It is NSF safety listed and has a 5-year limi...

Charlotte Pipe 1-1/2" DWV Schedule 40 Wye, is made of PVC and meets ASTM D 1784, ASTM D 2665, ASM D 3311. NSF STANDARD 14 standards. It has a diame...

1-1/2", Steel, EMT Raintite Coupler, For Outdoors, Use To Connect 2 Lengths Of EMT Conduit Together In A Wet Location, Concrete Tight & Raintight.

Fernco 1-1/2"x1-1/2" Flexible Coupling, Socket To Pipe Connection. It is designed for socket-to-socket and socket-to-pipe connections. It repairs o...

Fernco 1-1/2"x1-1/2" Flexible Coupling with 2 Stainless Steel Clamps. It connects cast iron or plastic to cast iron or plastic. It is corrosion res...

1-1/2", Zinc, Flat Corner Iron.

Water Source 1-1/2" Combination Plastic Foot/Check Valve. It is spring loaded and boxed. This foot valve holds prime in pump while filtering large ...

1-1/2" FTGxC 90 Elbow, C6072, features a solder cup, male solder end, and a close rough radius, fitting provides a means of changing the pipeline d...

ASC Anvil 1-1/2" Galvanized 45-Degree Elbow is made of malleable iron and has a galvanized finish. It is used to connect two pipes at a 45-degree a...

STZ 1-1/2" Galvanized 45 Degree Elbow. It is made of malleable iron and has a galvanized finish. The elbow has a maximum pressure of 300 and a maxi...

ASC Anvil 1-1/2" Galvanized 90-Degree Elbow is made of malleable iron and has a galvanized finish. It is used to change the direction of a pipe by ...

STZ 1-1/2" Galvanized 90 Degree Elbow is a threaded fitting used to connect two pipes at a 90-degree angle. It is made of iron and has a maximum wo...

1-1/2" Galvanized Compression Coupling

1-1/2" Galvanized Base Roof Flashing, No Caulk, Slides Over Pipe For Pitch To 40 Degree, Rustproof, Stamped Galvanized, Non Fading, Sealing Collar.

ASC Anvil 1-1/2" Galvanized Floor Flange. It is made of malleable iron and has a galvanized finish. It is used to connect a pipe to a floor.

ASC Anvil 1-1/2" Galvanized Lock Nut. It is made of malleable iron and has a galvanized finish.

ASC Anvil 1-1/2" Galvanized Pipe Cap. It is made of malleable iron and has a FPT end.

STZ 1-1/2" Galvanized Plug is a threaded plug used to seal the end of a pipe. It is made of iron and has a galvanized finish. The plug has a maximu...

ASC Anvil 1-1/2" Galvanized Pipe Plug. It is made of malleable iron and has a galvanized finish. It is a square head plug and has a MIP connection ...

ASC Anvil 1-1/2" Galvanized 90-Degree Street Elbow is made of malleable iron and has a galvanized finish. It is used to connect two pipes at a 90-d...

STZ 1-1/2" Galvanized 90 Degree Street Elbow is a threaded fitting used to change the direction of a pipe. It has a maximum working pressure of 300...