Products

Spyder Stinger 1-1/16-in X 6-1/2-in Auger Bit for wood & nail-embedded wood

Forney 1-1/16" x 1/4" A15 Shank Mounted Point. It is made from durable, high grade 60 grit aluminum oxide. It is perfect for grinding, polishing or...

1-1/16" ID x 1-1/4" OD x 1/8" Thick, #50, Fiber Washer, 1 Per Package, Bagged.

Lasco 1-1/16"x1-3/16"x1/16" #58 Faucet O-Ring. It is made of nitrile (Buna-N) rubber and is used for faucet repair or other uses. It is compatible ...

Lasco 1-1/16"x1-5/16"x1/8" #60 Faucet O-Ring. It is made of nitrile (Buna-N) rubber and is used for faucet repair or other uses. It is compatible w...

1-1/16" x 12" Nickel Continuous Hinge, Screw Holes Are Spaced At 2" Intervals, With Screws, 1 Per Pack, Carded.

Diablo, 1-1/16" x 17-1/2" auger bit. Diablo's auger bit range provides maximum performance, extreme durability and superior life in nail-embedded w...

Diablo, 1-1/16'' x 2-3/8'', Hole Saw, High Performance Delivers Faster Cutting Performance & Increased Productivity, Design Provides Ultimate C...

1-1/16" x 30", Nickel Finish, Continuous Hinge, With Screws, 1 Per Pack.

1-1/16" x 30", Bright Brass Finish, Continuous Hinge, With Screws, 1 Per Pack.

1-1/16" x 48", Brass Finish, Continuous Hinge, With Screws, 1 Per Pack.

1-1/16" x 48", Nickel Finish, Continuous Hinge, With Screws, 1 Per Pack.

WM238, 1-1/16" x 1-1/16" x 8', Square, Solid Pine Moulding.

1-1/2" - 3" All Flash, No Caulk, Thermoplastic Base Roof Flashing, Fits 1-1/2", 2" & 3" Pipe.

Charlotte Pipe 1-1/2" DWV 22-1/2-Degree Schedule 40 Elbow is made of PVC. It is used for non-potable water and has a working temperature range of 3...

1-1/2", 3 Way, Cast Satin, Slip Tee, Bulk.

1-1/2" Or 1-1/4" OD Slip Joint Ends, White PVC 45 Degree Lavatory/Kitchen Drain Elbow, Includes 2 Nuts & Washers, Carded.

Charlotte Pipe 1-1/2" ABS/DWV 45-Degree HubxHub Ell. It is used to make a 45-Degree turn from another fitting. It is for non-pressure drain, waste ...

1-1/2", White, 45 Degree, lip x Slip Ell, Used To Make A 45 Degree Turn In A Run Of Pipe, Used In Sprinkler & Irrigation Systems, Meets The Req...

1-1/2", 4 Edge Scraper Blade, Has 2 Rough & Smooth Edges, Black & Silver, Replacement Blade For #10530.

Tigre USA 1-1/2" Insert x1-1/2" Male Iron Pipe 90-Degree Insert Elbow. It is made of PVC and is used for pressure applications. It has a maximum pr...

1-1/2" White 90 Degree Street Elbow, Male Thread x Slip, Used To Make A Right Angle Turn From Another Fitting, Used In Sprinkler & Irrigation S...

1-1/2" White 90 Degree Street Elbow, Spigot x Slip, Used To Make A Right Angle Turn From Another Fitting, Used In Sprinkler & Irrigation System...

Charlotte Pipe 1-1/2" DWV 90-Degree Schedule 40 Vent Elbow. It is made of PVC and has a hub connection on both ends. It is used for non-potable wat...

Plumb Pak Insta-Plumb 1-1/2 in. 90-Degree Coupling (White) Allows for a faster and easier install with no nuts, washers, tools or glue needed. It i...

1-1/2" Slip Joint, White, 90 Degree Drain Elbow, With Nuts & Washers, Carded.

1-1/2" x 1-1/2", Chrome Plated, 90 Degree, Repair Coupling, With Nuts & Washers, 22 Gauge, Bagged.

1-1/2", White, 90 Degree, Slip x Slip Ell, Used To Make A 90 Degree Turn In A Run Of Pipe, Used In Sprinkler & Irrigation Systems, Meets The Re...

1-1/2" Aluminum No-Calk Roof Flashing, .032 Metal, UPC, SBC & BOCA Coded.

ASC Anvil 1-1/2" Black 45-Degree Elbow is made of malleable iron and has a black finish. It is used to connect two pipes at a 45-degree angle.

STZ 1-1/2" Black 45 Degree Elbow. It is made of iron and has a maximum working pressure of 500 psi. It is suitable for use with natural gas and oil...

ASC Anvil 1-1/2" Black 90-Degree Elbow. It is made of malleable iron and has a black finish.

STZ 1-1/2" Black 90 Degree Elbow is a threaded fitting used to change the direction of a pipe by 90 degrees. It is made of iron and has a maximum w...

ASC Anvil 1-1/2" Black Coupling is made of wrot steel and has a black finish. It is a standard merchant coupling and has a FIP connection type.

ASC Anvil 1-1/2" Black Floor Flange is made of malleable iron and has a black finish. It is used to connect a pipe to a floor.

STZ 1-1/2" Black Flange is a threaded iron flange with a black finish. It has a face size of 4-1/2" and a maximum working pressure of 300 psi. It i...

ASC Anvil 1-1/2" Black Pipe Cap. It is made of malleable iron and has a FPT end.

STZ 1-1/2" Black Pipe Cap is made of malleable iron and has a black finish. It is lead free and has a maximum pressure of 300 psi and a maximum tem...

ASC Anvil 1-1/2" Black Plug is made of malleable iron and has a black finish. It is used to plug the end of a pipe.

STZ 1-1/2" Black Plug. It is a threaded plug with a maximum working pressure of 300 psi and a maximum working temperature of 350 degrees Fahrenheit...

ASC Anvil 1-1/2" Black Street 90-Degree Elbow. It is made of malleable iron and has a black finish. It is used to connect two pipes at a 90-degree ...

STZ 1-1/2" Black 90 Degree Street Elbow. It is made of malleable iron and has a black finish. It has a maximum pressure of 150 pounds per square in...

STZ 1-1/2" Black 45 Degree Street Elbow. It is made of steel and has a black finish. It has a 1-1/2" FPT end and a 1-1/2" MPT end.

ASC Anvil 1-1/2" Black Tee. It is made of malleable iron and has a black finish. It has three FPT (Female Pipe Thread) ends.

STZ 1-1/2" Black Tee. It is a triple fitting with a size of 1-1/2" x 1-1/2" x 1-1/2". It is made of iron and has a maximum working pressure of 300 ...

ASC Anvil 1-1/2" Black Union is made of black & galvanized malleable iron ground joint with inserted brass seat. It is for working pressure up ...

1-1/2" Brass Raised Head Plug.

1-1/2", Bronze/Copper Finish, Contempo Cabinet Knob, Poly Bag.